A transient fluid–structure interaction analysis strategy and validation of a pressurized reactor with regard to loss-of-coolant accidents

Nuclear Science and Techniques - Rare event search experiments are one of the most important topics in the field of fundamental physics, and high-purity germanium (HPGe) detectors with an ultra-low...     

基于大数据分析的分布式MOLAP技术研究

在计算机系统运行以及研究环节中,会存在大量的规模效应,此类状况难以避免,要想有效解决此类问题,就需要利用分布式的处理方式,开展对文件系统的分析。文章对分布式多维联机分析过程(MOLAP)的数据模型进行了分析,从维编码的算法、映射归约(MapReduce)算法的实现、分析维的遍历算法等方面作深入探讨。     

基于CFD-DEM方法的净化器流场模拟与结构优化

针对空气净化器能耗高的问题，使用离散元方法(DEM)在吸附滤网中建立随机堆积柱形活性炭模型，采用计算流体力学(CFD)方法对空气净化器内部流场进行数值模拟，在模拟与实验验证的基础上，考察了压降最小、流场最均匀的吸附滤网结构。结果表明，空气净化器压降主要发生在轴向，活性炭吸附滤网中回流、沟流现象严重，流体阻力是其他两种滤网的3倍。边数对多边形填充孔结构吸附滤网内压降与流场均匀性无影响，当孔结构改为圆形时，压降减小约52 Pa，节能18.4%(49 W)；当孔直径由8 mm增至12 mm，压降减小约48 Pa，节能19.4%(45 W)；滤网间距对空气净化器压降无影响，圆形、小孔径的吸附滤网内流场最均匀。     

Optimal design of Raman fibre amplifier based on terminal value optimization strategy and shuffled frog leaping algorithm

This paper introduces an evolutionary algorithm, Shuffled Frog Leaping Algorithm (SFLA), to solve the optimization problem in designing the multi-pumped Raman Fibre Amplifier (RFA). SFLA is a powerful optimizer tool because of its efficient mathematical expressions and global search capability. We utilize SFLA to determine the optimal pump wavelengths and pump powers by minimizing the gain ripple of RFA. To accelerate calculations, a terminal value optimization strategy (TVOS) is incorporated into the evolution of SFLA. This proposed strategy takes the terminal power values of pumps as the decision variables in optimization. Then, the optimal original power values of the pumps are obtained by solving the Power Coupled Equations once, without using the traditional method of repetitive guesses.The combination of SFLA and TVOS enhances the efficiency of optimization and accelerates calculation, while satisfying the design requirements of RFA.The simulation results show that nearly 65% of computational time has been saved compared with the traditional average power analysis. The 4-pumped C+L band of backward multi-pumped RFA with the average net gain of 0 dB, 1 dB and 2 dB are designed individually, where the gain ripple is less than 0.64 dB. The combination of SFLA and TVOS enhance the optimization efficiency and improve the performance of RFA with good gain profile.     

MSCT多期增强扫描在肾脏透明细胞癌中的诊断价值

目的探讨多排螺旋CT(MSCT)多期增强扫描在肾脏透明细胞癌诊断中的规律性,提高对该肿瘤诊断水平。方法回顾性分析2016年1月~2018年6月14例均经手术切除病理证实为肾脏透明细胞癌患者的CT影像资料,所有病例均行MSCT平扫及多期动态增强扫描。结果14例肾脏透明细胞癌形态大多数呈圆形或者类圆形,瘤体最大径范围1.7cm^11.3cm,平均(4.8±1.4)cm,13例CT平扫时肿瘤密度不均匀,呈等低密度,1例呈等密度;12例出现坏死囊变,钙化1例,伴肾盂、肾盏侵犯2例;动态增强扫描可见12例包膜完整,1例均匀性强化,13例不均匀性强化;引入对比剂后皮质期,出现10例病灶强化幅度大于肾皮质,而仅4例低于肾皮质,三期平均CT值分别为110±30Hu,90±15Hu及75±14Hu,其中在实质期出现13例肿瘤强化幅度小于肾实质,仅1例大于肾实质。结论引入对比剂动态增强扫描后,肾脏透明细胞癌在皮质期明显不均匀强化,实质期强化幅度下降显著,呈现出典型的“快进快出”血流动力学强化方式,且肿瘤容易出现坏死、囊变为其特点。     

Investigation of the grinding temperature and energy partition during cylindrical grinding

In this study, the distribution of temperature and energy under the process parameter conditions and thermal physical parameters are investigated using a physics-based model via the finite element modeling (FEM) simulation and experimental validation during cylindrical grinding. A cylindrical grinding model is modeled to simulate the chip removal behavior in the grinding process and to measure the workpiece and chip temperatures by refining the temperature field. Workpiece speed affects the energy partition into chip more obviously than other grinding parameters. Reasonable selection of grinding parameters greatly reduces the energy partition into the workpiece from 80% to 50–30% or even lower. This study offers a comprehensive understanding of heating mechanisms during grinding and thus is very beneficial for process optimization.     

Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy

An Al–Zn–Mg–Cu (Al-7B04) aluminium alloy in two conditions, i.e. with an artificial aging (7B04-AA) temper and with an annealing (7B04-O) temper, was friction-stir processed using water cooling, and the microstructure and the mechanical properties of the stir zone (SZ) were investigated. Compared with the samples subjected to air cooling, the SZs of water-cooled samples were strengthened, and the degree of strengthening depended on the initial base metal temper. For friction-stir-processed material after an 7B04-O temper, the efficiency of strengthening was relatively high due not only to the refinement of grains and strengthening precipitates but also due to the high solution level in the SZ. In contrast, the slight strengthening of friction-stir-processed 7B04-AA resulted solely from grain refinement.     

Scalable fabrication of novel SiC nanowire nonwoven fabric

Flexible papers constructed by one-dimensional nanowires have attracted much attention due to their various applications. Herein, a novel nonwoven fabric with paper-like qualities composed of zinc blende SiC (β-SiC) nanowires was fabricated by a scalable rolling process. The SiC nanowires were synthesized by the carbothermal reduction reaction of the carbon fiber and carbonaceous silica xerogel. The crystal phase, morphology and microscopic structure of the as-prepared SiC nanowires were characterized by field emission scanning electron microscope, X-ray diffraction and high-resolution transmission electron microscopy. The nanowire vapor–solid growth mechanism and preparation process for SiC nanowire nonwoven fabric were also discussed. The freestanding SiC nanowire nonwoven fabric exhibited high flexibility, high mechanical strength, excellent refractory performance and thermal stability. With high flexibility, high mechanical strength, superior nonflammability and thermal stability, the flexible paper-like 3C-SiC nanowire nonwoven fabric materials would be expected to have some potential applications, such as ceramic matrix composites, metal matrix composites, energy storage, catalyst supports, radiation-proof fabric, filtration and separation.     

基于介形类生态特征评价湖南某铀矿山地表水放射性环境

湖南某铀矿为我国一重要铀资源生产基地，长年的矿冶活动使该铀矿冶地域生态环境不可避免地遭到了一定程度破坏。本文以该铀矿冶地域介形类为研究对象，分析其分布与生态特征，并利用该生物评价本矿冶地域地表水放射性污染状况。结果表明，Cypridopsis vidua在溪流与河流中均有分布，Helerocypris incongruens仅发现于河流，两者丰度均不高。利用该两种介形类丰度及总丰度变化可指示水体铀浓度的变化，丰度越小，铀含量越大，反之亦然。Shannon-Wiener物种多样性指数与水体铀浓度呈明显负相关，表明也可利用介形类生物指数指示水体铀浓度。该生物指数明显偏低，说明该铀矿冶地域地表水环境质量需要改善，放射性污染应引起足够重视。